Idaho Patio Misters for Hot, Dry Summer Afternoons

Name: The Patio Misting System Pro - 100 ft.
Brand: The Patio Misting System

Idaho summers are mostly dry, with hot afternoons across the Treasure Valley and the Snake River Plain. Idaho Patio Misters from The Patio Misting System use a 1000 PSI pump and stainless nozzles to cool decks and patios without soaking them.

Shop The Patio Misting System Pro Visit ThePatioMistingSystem.com

Idaho Patio Misters - The Patio Misting System misting a backyard patio

Quick answer: are patio misters a good fit for Idaho?

Yes, for most of the state. Southern Idaho summers are typically dry, and dry air lets mist evaporate fast, which is how misting cools. The Patio Misting System Pro is a DIY kit rated up to 30°F cooler, depending on heat and humidity, and covers 20 to 100 linear feet with about a 2-hour install.

Idaho Patio Misters by city

From the Treasure Valley to North Idaho, here's how Idaho Patio Misters setups tend to look.

Boise

Boise backyards see hot, dry July and August afternoons. A pergola or patio-cover line of Idaho Patio Misters makes late-day dinners outside easier.

Meridian

Newer Meridian homes often have covered back patios that are a natural mount for 1/4" tubing along the beam.

Nampa

Nampa patios and shops can use a long run. The Pro kit's 100 ft of line can wrap a patio and continue down a side yard.

Idaho Falls

Eastern Idaho sits at higher elevation with warm, dry summer days. A shorter 20 to 40 ft run over a deck is often enough.

Twin Falls

The Magic Valley gets dry summer heat. The included calcium inhibitor filter helps if your water leaves mineral spots.

Coeur d'Alene

North Idaho summers are milder, but lake-house decks in full sun still warm up. Fine .15mm nozzles keep mist light around furniture.

Dry air makes Idaho Patio Misters effective

A misting system cools when fine water droplets evaporate and take heat with them. Southern Idaho's summer air is usually dry, so droplets evaporate quickly and the cooling is noticeable. The Patio Misting System's high-pressure pump creates the small droplets that make this work.

The brand states up to 30°F of cooling, with results varying by heat and humidity. On a dry Boise afternoon you're on the favorable end of that range.

Short seasons, simple setup

Idaho's patio season is shorter than Arizona's, so a system that goes up quickly matters. The Patio Misting System connects to a garden hose and a standard outlet and takes about 2 hours for most DIY installs. Follow the five steps at the installation site: measure, anchor the tubing, add nozzles, set up the pump, then flush and check for leaks.

Idaho winters freeze, so drain the line and store the pump before cold weather arrives. Removing the tubing from its clamps is quick when it's time to put things away.

Quiet enough for the neighborhood

Treasure Valley subdivisions put backyards close together. The Patio Misting System pump runs under 56 dB, and because it can sit away from the line without losing pressure, you can tuck it behind a fence or shed.

What's in The Patio Misting System Pro – 100 ft kit

1000 PSI Mist Pump Pro (oil-lubricated, 3-piston)
50 stainless steel nozzles in mixed sizes
50 quick-connect couplers with nozzle holes
50 C-clamps for mounting
3 end caps with nozzle hole
5 90° L connectors and 2 T connectors
2 straight 1/4" fittings (no hole)
100 ft of 1/4" OD mist line tubing
Garden-hose inlet hookup
Calcium inhibitor filter
GFCI plug
Tube cutter
Oil syringe (5W-30 recommended; oil not included)
Extra O-rings

The Mist Pump Pro in The Patio Misting System kit is a 1000 PSI, 3-piston, oil-lubricated pump you control by Bluetooth or remote. It runs from a garden hose and a wall outlet at under 56 dB. Everything wet is stainless (nozzles and connectors), you can upgrade to stainless tubing, and the motor footprint is 16" x 8.5" x 9.5" high. Coverage: free 1-year warranty.

See the Pro kit

Idaho Patio Misting System high-pressure pump

How to choose Idaho Patio Misters

Start with your square footage, then linear feet. Measure the edge of your cover. The kit fits 20 to 100 linear feet.
Match nozzles to your heat. Use .3mm for more mist in dry heat or on high mounts, and .15mm or .1mm for lighter mist near seating.
Check your water. For mineral-heavy water, use the included calcium filter; two inline filters are recommended for hard water.
Plan for winter. Pick a mount you can easily drain and take down before Idaho freezes.
Choose a quiet pump spot. The pump runs under 56 dB and can sit far from the patio.

Treasure Valley or North Idaho, the five-step process is the same, and it's laid out in the Patio Misting System installation guide.

Idaho Patio Misters cooling an outdoor seating area

Shipping to Idaho

Kits headed to Idaho go out by UPS from Phoenix, AZ, normally 24 to 48 hours after the order. US standard delivery is 3 to 7 business days, and priority is 1 to 3. Orders over $99 get free standard shipping. Pickup isn't available.

Idaho Patio Misters FAQ

Do Idaho Patio Misters work in Boise's dry heat?

Yes. Dry air helps mist evaporate, which is what produces the cooling.

How much cooling should I expect?

The Patio Misting System says up to 30°F, depending on heat and humidity.

Can I install it myself?

Yes. Most DIY installs take about 2 hours with a hose spigot and a standard outlet.

What should I do in winter?

Drain the line and store the pump before freezing weather.

How long can the line be?

The Pro kit includes 100 ft of tubing and fits 20 to 100 linear feet.

Does it handle hard water?

A calcium inhibitor filter is included, and two inline filters are recommended for hard water.

What warranty comes with it?

A free 1-year warranty.

Idaho Patio Misters blog

Idaho Patio Misters on a Boise patio cover

Set up Idaho Patio Misters this summer

The Patio Misting System Pro – 100 ft brings a complete DIY high-pressure misting kit to Idaho patios, with a quiet pump, stainless nozzles and a free 1-year warranty.

Buy The Patio Misting System Read the install guide